 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Continental Device India Limited An ISO/TS16949 and ISO 9001 Certified Company NPN SILICON PLANAR SWITCHING TRANSISTOR TN2222A TO-237 Plastic Package E BC For use as a Medium Power Amplifier ABSOLUTE MAXIMUM RATINGS DESCRIPTION Collector Emitter Voltage Collector Base Voltage Emitter Base Voltage Collector Current Continuous Power Dissipation @ Ta=25C Power Dissipation @ Tc=25C @ Ta=25C PCB Land Area for Collector Lead >1 sq inch @ Ta=25C with heat sink Operating And Storage Junction Temperature Range THERMAL RESISTANCE Junction to Case Junction to Ambient in free air Thermal Resistance >with PCB land area for collector lead >1 sq inch Thermal Resistance Junction to Ambient with heat sink PD SYMBOL VCEO VCBO VEBO IC VALUE 40 75 6.0 800 0.75 2.2 1.2 1.5 Tj, Tstg - 55 to +150 UNIT V V V mA W W W W C Rth (j-c) Rth (j-a) Rth (j-a) Rth (j-a) 57 167 104 83 C/W C/W C/W C/W ELECTRICAL CHARACTERISTICS (Ta=25C unless specified otherwise ) DESCRIPTION SYMBOL TEST CONDITION *VCEO IC=10mA, IB=0 Collector Emitter Voltage VCBO Collector Base Voltage IC=10A, IE=0 VEBO Emitter Base Voltage IE=10A, IC=0 ICEX VCE=60V, VEB(off)=3V Collector Cut Off Current ICBO VCB=60V, IE=0 Collector Cut Off Current VCB=60V, IE=0, Ta=150C IEBO VEB=3V, IC=0 Emitter Cut Off Current IBL VCE=60V, VEB(off)=3V Base Cut Off Current hFE IC=0.1mA, VCE=10V DC Current Gain IC=1mA, VCE=10V IC=10mA, VCE=10V IC=150mA, VCE=10V IC=150mA, VCE=1V IC=500mA, VCE=10V *Pulse Test: Pulse Width < 300s, Duty Cycle < 2% TN2222ARev080304E MIN 40 75 6 MAX 10 10 10 10 20 35 50 75 100 50 40 UNIT V V V nA nA A nA nA 300 Continental Device India Limited Data Sheet Page 1 of 5 NPN SILICON PLANAR SWITCHING TRANSISTOR TN2222A TO-237 Plastic Package E BC ELECTRICAL CHARACTERISTICS (Ta=25C unless specified otherwise) DESCRIPTION Collector Emitter Saturation Voltage Base Emitter Saturation Voltage SYMBOL *VCE (sat) *VBE (sat) TEST CONDITION IC=150mA, IB=15mA IC=500mA, IB=50mA IC=150mA, IB=15mA IC=500mA, IB=50mA TEST CONDITION VCB=10V, IE=0, f=100KHz VEB=0.5V, IC=0, f=100KHz IC=1mA, VCE=10V, f=1KHz IC=10mA, VCE=10V, f=1KHz IE=20mA, VCE=20V, f=31.8MHz IC=100A, VCE=10V, RS=IK, f=1KHz, Bw=1KHz IC=20mA, VCE=20V, f=300MHz MIN MAX 0.3 1.0 1.2 2.0 UNIT V V V V 0.6 SMALL SIGNAL CHARACTERISTICS DESCRIPTION Output Capacitance Input Capacitance Small Signal Current Gain Collector Base Time Constant Noise Figure Real Part of Common Emitter High Frequency Input Impedance SWITCHING TIME DESCRIPTION Delay Time SYMBOL Cobo Cibo hfe rb'CC NF Re(hie) MIN MAX 8.0 25 300 375 150 4.0 60 UNIT pF pF 50 75 pS dB SYMBOL td tr Rise Time ts Storage Time tf Fall Time *Pulse Test: Pulse Width < 300s, Duty Cycle < 2% TN2222ARev080304E TEST CONDITION IC=150mA, IB1=15mA, VCC=30V, VBE(off)=0.5V IC=150mA, IB1= IB2=15mA, VCC=30V MIN MAX 10 25 225 60 UNIT ns ns ns ns Continental Device India Limited Data Sheet Page 2 of 5 TN2222A TO-237 Plastic Package F B Dimension With 'M' Beyond 'M' 1 2 3 K D E D G L J AA SEC AA MIN. MAX. 4.32 5.33 4.45 5.20 3.18 4.19 0.41 0.55 0.35 0.50 -- 5.40 1.14 1.40 -- 2.54 1.03 1.20 12.70 -- 5 DEG 1.982 2.082 1.20 1.40 N All dimensions are in mm DIM A B C D E F G H J K L M Uncontrolled H Solderability Ensured M L Mold Parting Line 321 PIN CONFIGURATION 1. COLLECTOR 2. BASE 3. EMITTER 321 The TO-237 Package, Tape and Ammo Pack Drawings are correct as on the date of issue/revision of this Data Sheet. The currently valid dimensions and information, may please be confimed from the TO-237 Drawing in the Package and Packing Section of the Product Catalogue. Packing Details PACKAGE Details TO-237 Bulk TO-237 T&A 1K/ polybag 2K/ ammo box STANDARD PACK Net Weight/ Qty 240 gm/ pcs 1K 725 gm/ pcs 2K Size 3" x 7.5" x 7.5" 12.5" x 8" x 1.8" INNER CARTON BOX Qty 5K 2K Size 17" x 15" x 13.5" 17" x 15" x 13.5" OUTER CARTON BOX Qty 80K 32K Gr Wt 26.2 kgs 13.8 kgs TN2222ARev080304E Continental Device India Limited N C Data Sheet A Page 3 of 5 TN2222A TO-237 Plastic Package TO-237 Tape and Ammo Pack Tape Mechanical Data T1 h h A H3 H2 H1 Ho L C1 C2 W2 Wo W1 W A1 P A2 B (p) h1 h1 Ammo Pack Style Adhesive Tape on Top Side Flat side Label D FEE Carrier Strip 186 (7.3") F1 F2 F Do t1 t P2 332 43 (1.7 ") ") (1 3 Po Flat Side of Transistor and Adhesive Tape Visible 2000 pcs./Ammo Pack All dimensions are in mm ITEM BODY WIDTH BODY HEIGHT BODY THICKNESS PITCH OF COMPONENT * 1 FEED HOLE PITCH * 2 FEED HOLE CENTRE TO COMPONENT CENTRE DISTANCE BETWEEN OUTER LEADS SPECIFICATION SYMBOL A1 A T P Po P2 F h h1 W Wo W1 W2 Ho H1 L Do t F1, F2 H2 H3 | C1 - C2 | (p) A2 B T1 0.45 MIN. NOM. MAX. 4.0 4.8 3.9 12.7 12.7 6.35 5.08 0 0 18 6 9 0.5 16 23.25 11.0 4 1.2 2.54 1.45 3.0 0.22 5.40 2.54 0.45 + 0.4 - 0.1 REMARKS 0.2 1.0 1.3 0.5 0.2 + 0.7 - 0.5 0.2 0.5 4.8 5.2 4.2 1.0 0.3 0.4 + 0.6 - 0.2 TOL . NOTES 1. Maximum alignment deviation between leads will not to be greater than 0.2mm. 2. Maximum non-cumulative variation between tape feed holes shall not exceed 1 mm in 20 pitches. 3. Holddown tape will not exceed beyond the edge(s) of carrier tape and there shall be no exposure of adhesive. 4. There will be no more than three (3) consecutive missing components in a tape. 5. A tape trailer, having at least three feed holes are provided after the last component in a tape. 6. Splices should not interfere with the sprocket feed holes. * 3 COMPONENT ALIGNMENT SIDE VIEW * 4 COMPONENT ALIGNMENT FRONT VIEW TAPE WIDTH HOLD-DOWN TAPE WIDTH HOLE POSITION HOLD-DOWN TAPE POSITION LEAD WIRE CLINCH HEIGHT COMPONENT HEIGHT LENGTH OF SNIPPED LEADS FEED HOLE DIAMETER * 5 TOTAL TAPE THICKNESS LEAD - TO - LEAD DISTANCE STAND OFF CLINCH HEIGHT LEAD PARALLELISM PULL - OUT FORCE HEAT SINK WIDTH HEAT SINK HEIGHT HEAT SINK THICKNESS TN2222ARev080304E 6N * 1 Cumulative pitch error 1.0 mm/20 pitch * 2 To be measured at bottom of clinch * 3 At top of body * 4 At top of body * 5 t1 0.3 - 0.6 mm Continental Device India Limited Data Sheet Page 4 of 5 Customer Notes TN2222A TO-237 Plastic Package Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for C inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 5141 1112 Fax + 91-11-2579 5290, 5141 1119 email@cdil.com www.cdilsemi.com TN2222ARev080304E Continental Device India Limited Data Sheet Page 5 of 5 |
Price & Availability of TN2222A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |